I edited this listing and added a photo but it is not showing. Photos that were added prior to upgrading all show no problem.
I edited the list again and the photo is definitely showing that it is attached.
I did a manual upgrade but that didn't work.
I had this on another site, but it was new and I was able to delete the database and start from scratch, it then worked. Obviously I can't do that with this site.
I uploaded using the old way - I have the flash based uploader turned OFF.
Regenerating doesn't make any difference.
Also, with the other site I had this prob on I remember the rating stars did not show either. I have them switched off on this site, but have just put them on the details page at the top and switched them on - they do not show either, so it is not just the uploaded image. However, as far as I can see all other images are showing correctly.
Hi Jill, I have the same problem and I have noticed if I go to the database and edit the listing via wsndirectory_links "filefield" from 0 to 1 it shows the photos. However mysteriously after a day or so it reverts back to 0.
Well, I'm still unable to find any scenario in which the attachments don't show up. If it happens predictably on your site, I could find it there: http://www.wsnlinks.com/inspection.html
I see, it's fixed now. An update query was reverting filefield to 0 just after it got set to 1. I'm not sure why it doesn't have the problem in any of my own 6.0.9 installs though.
Comments on Added photo but not showing
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
I edited this listing and added a photo but it is not showing. Photos that were added prior to upgrading all show no problem.
I edited the list again and the photo is definitely showing that it is attached.
I did a manual upgrade but that didn't work.
I had this on another site, but it was new and I was able to delete the database and start from scratch, it then worked. Obviously I can't do that with this site.
TIA
Jill
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7867
Which uploader did you use?
Does it show when you regenerate the listing?
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
I uploaded using the old way - I have the flash based uploader turned OFF.
Regenerating doesn't make any difference.
Also, with the other site I had this prob on I remember the rating stars did not show either. I have them switched off on this site, but have just put them on the details page at the top and switched them on - they do not show either, so it is not just the uploaded image. However, as far as I can see all other images are showing correctly.
Jill
Beginner
Usergroup: Customer
Joined: Apr 16, 2010
Total Topics: 0
Total Comments: 1
Hi Jill, I have the same problem and I have noticed if I go to the database and edit the listing via wsndirectory_links "filefield" from 0 to 1 it shows the photos. However mysteriously after a day or so it reverts back to 0.
Hope this helps.
Joe
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Thanks Joe. Hope this info helps Paul in looking into the problem
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7867
Are you both requiring validation of attachments, or not? I'll try it both ways.
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
No, I don't. In fact I, as admin, attached the photo.
TIA
Jill
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7867
Well, I'm still unable to find any scenario in which the attachments don't show up. If it happens predictably on your site, I could find it there: http://www.wsnlinks.com/inspection.html
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Paul, I have already sent you ftp log in details - it is the same site that has the disappearing data.
Jill
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7867
I see, it's fixed now. An update query was reverting filefield to 0 just after it got set to 1. I'm not sure why it doesn't have the problem in any of my own 6.0.9 installs though.
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Paul - did you do something to fix this? I haven't touched it!
TIA
Jill
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7867
Yes, as mentioned in my last post it's fixed now.